Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.
Category
- ACR Accessories (4)
- Covers (48)
- Furuno Accessories (58)
- Fusion Accessories (8)
- Garmin Marine Accessories (226)
- Icom VHF Radio Accessories (24)
- Interface Cables and Connectors (67)
- Lowrance Accessories (70)
- Marine Lights (26)
- Mounts & Brackets (107)
- Nocqua (0)
- Poly Planar Accessories (1)
- Power Cords (39)
- Radar Cables (12)
- Raymarine Accessories (84)
- Simrad Accessories (34)
- Si-Tex Accessories (7)
- Standard Horizon Accessories (47)
- Transducer Cables (30)
- Installation Products (80)
- Siren Marine Accessories (0)
Marine Accessories
Fusion Silicone Dust Cover for RA70 Stereos.
Marine Network Cable PoE Isolation Coupler, Required when installing a FLIR camera on a Garmin Marine Network. Also requires an additional Garmin Marine Network Cable to connect from Coupler to MFD.
Protect your Lowrance HOOK2 9" and HOOK Reveal 9" Display from the elements with this Sun Cover. Compatible with 9" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 9" Displays.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.
in 3-5 Days
The Lowrance Hook2 Power Cable is compatible with all Hook 2 5", 7", 9", 12" units and HOOK Reveal series.
Standard Horizon 240SW 5" x 7" PA Horn. 4 Ohm and 30W output.
Pair the HV-100+ Transom Mount transducer with your Raymarine element for excellent underwater images and water temperature. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat!
Shipping!
The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
Shipping!
Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P79 in-hull mount traditional transducer to a compatible ECHOMAP Plus, echoMAP CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.
in 3-5 Days
The Standard Horizon HC2400 Dust Cover is compatible with the Standard Horizon GX2000/ GX2200 and GX2400 Matrix Series Radios and is a direct replacement to the HC2000 dust cover.
Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.
Protect your Garmin GPSMAP 12x2 series GPS display from scratches and sun when not in use!
Protect your Lowrance Elite 9 FS display from scratches and sun when not in use!
Icom 7.2V Li-Ion BP-306 Battery. Compatible with Icom M94D Handheld VHF.
Can Not Ship via Air Service, Must Ship Ground Only!
Shipping!
Furuno AIR-033-333 Transducer Pigtail, 10-Pin(F), 2 Meters
The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.
Display Cover for 9" ECHOMAP UHD2 SV units - 92SV, 93SV and 94SV GPS/Fishfinders.
Does Not work with Garmin 9" Echomap Plus or UHD units
The Garmin 2-Pin Threaded Power Cable is compatible with ECHOMAP UHD2 6-Inch, 7-Inch SV and 9-Inch Displays and measures 6 feet long.
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
Shipping!
The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The YK-998 LED flashlight can provide up to 120 hours of light while outputting 120 max luminous flux. The rotary 'switch free' operation is easy to use and the rugged, waterproof design ensures your YK torch can even withstand deep sea exploration. The YJ-998 is dive tested to 15m.
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Color: Black
Shipping!
Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. The NGX-1-ISO is equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.
Shipping!
Lumishore's SMX54 Surface Mount offers 2 lights in one! With both blue and white color options, the SMX54 features 7,500 fixture lumens with a wide 90° beam of light. Designed for vessels up to 50' in length. Now ECLIPSE Compatible!
Shipping!
Airmar Kick Up Bracket for P66 transom mount transducer(replacement). Works with any Airmar P66 transducer.
Garmin Marine Network Cable (40').
The Furuno AIR-033-204 Adapter Cable adapts 8-Pin Furuno Transducers to Furuno Fishfinders with 10-Pin Transducer Connector. Length: 1 Meter.
Shipping!
Garmin 10' Transducer Extension Cable for 4-Pin Transducers.
Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Female Adapter Cable
Network two Raynet devices together with the Female/Female Cable. Length 2M
Shipping!
Network two Raynet devices together with the Female/Female Cable. Length 5M
Shipping!
Lowrance HDS / Elite and Hook HDI Series Power/Data Cable.
for all HDS / Elite-TI / Elite HDI / Hook HDI series units
Raymarine Converter kit allows select SeaTalk 1 devices to interface and communicate on the SeaTalk NG data network. Plug and Play insallation.
Shipping!
Paired with a GHP20, GHP12 or Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.
Order Now and Get Free UPS Ground Shipping!
Shipping!
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
Garmin 8-Pin 10' Transducer Extension Cable.
The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.
Garmin 30 foot transducer extension cable for Garmin 12-Pin Transducers.
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).
Lumishore's SMX11 Surface Mount Underwater LED Lights add bright underwater lighting to your vessel and are easy to install. Perfect for above or below the water line, the SMX-11 provides 60 degrees of light while only drawing 1 amp current from 12v.
Shipping!
Replacement FNB-V110 Lithium-Ion battery for Standard Horizon HX290 Handheld VHF.
in 3-5 Days
Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.
Expected 5/24/2024
Shipping!
Garmin Bail Mount and Knobs for GPSMAP 7412, 7412xsv, 7612 and 7612xsv as well as Garmin GPSMAP 1242/1242xsv TOUCH units.
in 3-5 Days
Garmin Protective Cover for 9" echoMAP units. Compatible with Garmin echoMAP 93sv, 94sv, echoMAP CHIRP 92sv, 93sv,94sv and 95sv. Does not work with PLUS or UHD models
Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.
Garmin adapter cable connects a 4-pin transducer to a 8-pin sounder.
Use this wire block to adapt your bare wire transducer to a 12-Pin Garmin connector.
Shipping!